Applicators-2

Home Applicators-2

“So you need applicators?

Applicator Options

Standard Tamp

Paragon Single Tamp applicators are designed to place one label on a product, carton, case or pallet. The versions listed below cover most applications or Paragon can design a custom single tamp applicator for your unique application.

Description: A label is printed (or pre-printed label) and dispensed onto a vacuum pad. When the approaching product is detected, an air cylinder engages, causing the pad to come in momentary contact with the product to apply the label.

Dual Tamp

Paragon Dual Tamp applicators are designed to place two separate labels on adjacent sides of a carton, case or pallet. Typically, the placement is on the side and trailing panels or the following and side panels. The versions listed below cover most applications or Paragon can design a custom dual tamp applicator for your unique application.

Description: The first label is printed and dispensed onto a vacuum pad. When the approaching product is detected, an air cylinder engages, causing the pad to come in momentary contact with the product to tamp the label onto the first panel. Then, a duplicate label is printed and applied in a similar manner to an adjacent panel as the product passes by.

Roll-On

Paragon Roll-On applicators are designed to place one label on a carton, case or pallet. It is well suited for long, narrow labels. The versions listed below cover most applications or Paragon can design a custom roll-on applicator for your unique application.

Description: A label is printed (or pre-printed label) and dispensed onto a hinged vacuum pad. When the approaching product is detected, an air cylinder engages, causing the hinged section of the pad to come in contact with the product affixing the leading edge of the label. As the product passes the applicator arm rolls the label onto the surface.

Corner Wrap

Paragon Corner Wrap applicators are designed to place a single label on two adjacent panels of a carton, case or pallet. The versions listed below cover most applications or Paragon can design a custom corner wrap applicator for your unique application.

Description: A label is printed (or pre-printed label) and dispensed onto a vacuum pad on the applicator arm, which is positioned in the path of the oncoming product. When the approaching product is contacted, the label is first affixed to the leading panel. As the product passes by, the arm rolls the label around the corner onto the side surface. The label can be applied asymmetrically on the adjacent surfaces if desired. Paragon can also provide a secondary-wipe style of applicator if preferred.

Vacuum Blow

Paragon Vacuum Blow applicators are designed to place one label on a product, carton or case without contacting the product. It is well suited for irregular surfaces and fragile products and packaging. The versions listed below cover most applications or Paragon can design a custom vacuum blow applicator for your unique application.

Description: A label is printed (or pre-printed label) and dispensed onto a vacuum pad. When the approaching product is detected, a precise burst of air blows the label onto the surface without impact or damage. Also, see Paragon Tamp-Blow.

Wipe-On

Paragon Wipe-On applicators are designed to place one pre-printed label on a product, carton, case or pallet using the Paragon Express apply-only chassis. It is well suited for a variety of applications including: decorative, high-gloss labels; coupons; long, narrow labels; and high-speed application of primary labels. Choose the standard wipe-on applicator or Paragon can design a custom wipe-on for your unique application.

Description: A pre-printed label is dispensed and as the product passes by, the brush on the applicator arm gently and accurately wipes the label onto the surface.